VAINO INTERNATIONAL LIMITED
5 1

View Strip Line Automatic Extrusion Blow Molding Machine For 1gallon Lubrication Oil Container

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price
You may also be intersted in
extrusion blow moulding machine

Contact us

VAINO INTERNATIONAL LIMITED
[China]

Address
Room1315,B# Ningbo Chamber Of Commerce Building,No.588 Tiantong South Road,Yinzhou District,Ningbo,China beijing beijing
Phone
86-574-88054805
Contact name
Tina

Quick Information

  • Brand Name: MEPER
  • Place of Origin: China
  • Model Number : MP70D

Description

View strip line automatic extrusion blow molding machine for 1gallon lubrication oil container

Brief introduction

MP70 is one of the most popular model for products below 5L

View strip optional

co-extrusion(multi-layer)optional

Double station or Single sation optional

Advantage:

1. adopt four position leader structure and supporting grider design, it is good at stability.

2.carriage moving design adopts tie-bar and linear guide,heavy and stong structure design make sure machine works more faster ,smooth and stable in fast cycle.

3. copper meatus connection between the platen and carriage ,self-detector distribute installed,make sure machine lubrication system are in super good condition.

4. adopt double proportional valve in hydraulic system, it is high-efficiency in production and low vibration in pressure.

5. Special protection for the machine and people

    Sensor in the operating door: if anybody enter the machine,the electricity conneced with the machine will automatic cut down.

   Temperature interlock system:When the material inside the barrel is not reaching the setting temperature,the extrusion motor can never start.that will help the screw and head of the machine.

6. Easy die head dis-assemble and assemble

7. adopt and prefer to use seamless and stainless meatus in hydraulic connection design from valve mainifoild to oil cylinder. compare to pipes,it is more stable to avoid oil leakage.

Center distance introduction:

Double head standard Center distance:160mm (170,180,200mm as option)

Thriple head standard center distance:120mm(100,120,125,130mm as option)

Four head standard center distance:100mm(90mm as option)

Six head standard center distance:60,70mm

Mainly applicable field:

a) Pharmacy packing and cosmetic field:including madicin bottles, eyedrop bottles,cosmetic bottles.

b) Auto parts: air-contidional pipes,oil tank,water tank,hollow parts from the auto.

c) Food and beverage packing:beverage bottles(milk container,juice bottles ,jar)

d) Oil and chemical field: petrol jars,oil barrel,painting buckets other chemical packing and tray,cleanser bottles….

e) Toys: body of revise pens,gumwater bottles,sand beach balls,hollow toys(including stationary toys ,collection jars and big assembled slide ladder…..

f) Other applicable area:tool boxes,pesticide bottles,atomizer,bed bords, desk bords,basketball bord

Machine specification:

Specifications   MP70
Material   PE,PP,(PVC,PA)OPTION
Max container capacity L 5
Number of die set 1,2,3,4,6
Machine Dimension(L×W×H) M 3.4×2.36×2.36
Total  weight ton 4.5
Clamping force kn 70
Platen opening stroks mm 180-480
Stroke of mould board mm 300
Platen size mm 340×420
Max mould size(W×H) mm 400×420
Mould thinkness mm 185-250
Screw diameter mm 70
Screw L/D ratio L/D 24
Plasticising capacity kg/h 65
Number of heating zone zone 3
Extruder heating power kw 14.5
Power of screw-bar machine kw 0.18
Extruder driving power kw 18.5
Number of heating zone zone 2
Power of die heating kw 6.5
Max die-pin diameter mm 130
General power of machine  kw 42.68
Power of the electric motor of oil pump kw 9.5
Air pressure Mpa 0.6-0.8
Average energy consumption kw 23
Using quantity of compression air m3/min 1.5
Using quantity of cooling water m3/min 1.5-2.5

Machine parts photo

Defleshing system type:Push on top and bottom with air cooling system.

Complete defleshing share the same platen with Mould back platen,more accurate and easy changing.


Product Image

  • View Strip Line Automatic Extrusion Blow Molding Machine For 1gallon Lubrication Oil Container image

Related products from premium suppliers on EC21

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Tina
VAINO INTERNATIONAL LIMITED
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Temperature Instruments
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.